Permanent AlNiCo Magnets Aluminium, Nickel, Cobalt et Iron alloy
depictio producti
AlNiCo Magnet (Aluminium, Nickel, Cobalt, et stannum ferreum) obtinetur processu fundendo, resinae phaenolicae arenae in vili formata.Operari potest in ambitibus usque ad 500 °C cum optima resistentia contra corrosionem, ideoque raro requiritur tunicarum.
Formae finales typicae ut stipites, cylindrici, annuli et arcus obtinentur secando et attritu processuum clausorum signatorum pressorum vel compressione unitaria partium pre-maculatarum.Optime tolerantiae praeclarae obtineri possunt, licet propter nimiam fragilitatem tractandae et collectae sint cum cura ad vitandum astulas et rimas.
Magnetes AlNiCo partes essentiales agunt in multis productis industrialibus et consumere.Potes invenireAlNiComagnetes in motoribus electricis, in pickups cithara electrica, in microphones, sensoriis, loquentibus, tubulis undarum iter, magnetibus bovis, etc.
| Item | Gradus | Remanence inductio | Coactio | Coactio vis intrinseca | Maximum Energy productum | opus Temp | Density | Animadverte | ||||
| Br | Hcb | Hcj | (BH)max | Tw | ρ | |||||||
| T | KGs | KA/m | KOe | KA/m | KOe | KJ/m3 | MGOe | °C | g/cm*3 | |||
| Sintred AINiCo | AlNiCol0/5 | 0.60-0.63 | 6.0-6.3 | 48-52 | 0.60-0.65 | 52-56 | 0.65-0.7 | 8-10 | 1.00-1.25 | ≤450 | 6.8 | Isotropic |
| AlNiCol2/5 | 0.70-0.75 | 7.0-7.5 | 48-56 | 0.60-0.70 | 52-58 | 0.65-0.73 | 11-13 | 1.4-1.6 | ≤450 | 7.0 | ||
| AlNiCol4/8 | 0.55-0.60 | 5.5-6.0 | 75-91 | 0.95-1.15 | 80-95 | 1.0-1.2 | 14-16 | 1.75-2.0 | ≤550 | 7.0 | ||
| AlNiCo20/10 | 0.60-0.64 | 6.0-6.4 | 93-110 | 1.16-1.38 | 100-118 | 1.25-1.4 | 18.0-22.4 | 2.25-2.8 | ≤550 | 7.0 | ||
| AlNiCo28/6 | 1.0-1.12 | 10.0-11.2 | 56-64 | 0.7-0.8 | 58-66 | 0.73-0.83 | 28-32 | 3.5-4.0 | ≤550 | 7.2 | Anisotropic | |
| AlNiCo34/5 | 1.15-1.23 | 11.5-12.3 | 48-56 | 0.60-0.70 | 49-57 | 0.62-0.72 | 32-36 | 4.0-4.5 | ≤550 | 7.2 | ||
| AlNiCo37/5 | 1.19-1.27 | 11.9-12.7 | 48-56 | 0.60-0.70 | 49-57 | 0.62-0.72 | 36-38 | 444.8 | ≤550 | 7.2 | ||
| AlNiCo40/5 | 1.22-1.26 | 12.2-12.6 | 50-56 | 0.62-0.7 | 51-57 | 0.64-0.72 | 38-40 | 4.8-5.0 | ≤550 | 7.2 | ||
| AlNiCo40/10 | 0.95-1.0 | 9.5-10.0 | 100-110 | 1.25-1.38 | 104-114 | 1.3-1.43 | 40-44 | 5.0-5.5 | ≤550 | 7.1 | ||
| AlNiCo38/11 | 0.80-0.85 | 8.0-8.5 | 111-121 | 1.40-1.52 | 114-125 | 14.3-15.7 | 38-40 | 4.8-5.0 | ≤550 | 7.1 | ||
| AlNiCo36/15 | 0.70-0.75 | 7.0-7.5 | 140-160 | 1.75-2.0 | 154-174 | 1.93-2.18 | 36-45 | 4.5-5.6 | ≤550 | 7.0 | ||
| AlNiCo40/16 | 0.7-0.75 | 7.0-7.5 | 160-175 | 2.0-2.2 | 174-189 | 2.18-2.37 | 40-44 | 5.0-5.5 | ≤550 | 7.0 | ||
| AlNiCo40/12 | 0.83-0.90 | 8.3-9.0 | 120-132 | 1.50-1.65 | 124-136 | 1.57-1.71 | 40-44 | 5.0-5.5 | ≤550 | 7.1 | ||
| AlNiCo45/13 | 0.89-0.91 | 8.9-9.1 | 120-132 | 1.50-1.65 | 126-138 | 1.58-1.73 | 44-50 | 5.5-6.2 | ≤550 | 7.1 | ||
